case style: dv874 rev. a m151108 edr-7165/4uf1 RVA-2000V3+ urj/rav 161211 page 1 of 2 maximum ratings electrical specifcations (t amb = 25 o c) features voltage variable attenuator 50? 50 to 2000 mhz broad band operating temperature -55c to 85c storage temperature -55c to 85c absolute max. supply voltage(v+) 6v absolute max. control voltage(vctrl) 12v absolute max. rf input level +18dbm applications ? power level control ? feed forward amplifers ? broadband, 50-2000 mhz ? ip3, +50 dbm typ. ? good vswr at in/out ports over attenuation range ? no external bias and rf matching network required ? shielded case ? aqueous washable equivalent schematic matching matching v control v+ rf in rf out RVA-2000V3+ typical attenuation at 900 mh z 0 5 10 15 20 25 30 35 40 45 012345678910 control voltage (v) attenuation (db) RVA-2000V3+ notes: rise/fall time: 20sec/20sec typ. switching time, turn on/off: 25sec. typ. freq. min. insertion max. attenuation input control ip3 return power supply (mhz) loss, db (+10v) db (0v) power voltage current (dbm) loss voltage current (dbm) (v) (ma) (db) (v) (ma) min. max. typ. max. typ. min. max. max. typ. typ. max. 50 - 1000 4.0 5.0 55 35 +18 0 - 10 20 48 25 +3 5 1000 - 2000 4.5 6.0 40 30 +18 0 - 10 20 50 20 +3 5 pin connections demo board mcl p/n: tb-163 suggested pcb layout (pl-040) rf in 2 rf out 10 v control 6 v+ 14 ground 1,3,4,5,7,8,9,11,12,13,15,16 inch mm outline dimensions ( ) a b c d e f g h j .500 .500 .195 .100 .080 .115 .060 .040 .540 12.70 12.70 4.95 2.54 2.03 2.92 1.52 1.02 13.72 k l m n p q r s wt. .060 .100 .135 .135 .115 .140 .070 .150 grams 1.52 2.54 3.43 3.43 2.92 3.56 1.78 3.81 1.0 outline drawing top side bottom side side view pcb land pattern suggested layout, tolerance to be within .002 metallization solder resist permanent damage may occur if any of these limits are exceeded. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 2 of 2 RVA-2000V3+ attenuation vs. frequenc y over control voltages 0 10 20 30 40 50 60 70 80 0 200 400 600 800 1000 1200 1400 1600 1800 2000 frequency (mhz) attenuation (db) 0v 2v 4v 7v 10v RVA-2000V3+ input return loss vs. frequency over control voltages 0 10 20 30 40 50 60 70 80 0 200 400 600 800 1000 1200 1400 1600 1800 2000 frequency (mhz) return loss (db) 0v 2v 4v 7v 10v RVA-2000V3+ ip3 vs. frequency over control voltages 40 42 44 46 48 50 52 54 56 0 200 400 600 800 1000 1200 1400 1600 1800 2000 frequency (mhz) ip3 (dbm) 0v 2v 4v 7v 10v RVA-2000V3+ attenuation vs. input power over control voltages at 900 mhz 0 10 20 30 40 50 60 70 0 2 4 6 8 10 12 14 16 18 input power (dbm) attenuation (db) 0v 2v 4v 7v 10v RVA-2000V3+ output return loss vs. frequency over control voltages 0 10 20 30 40 50 60 70 80 0 200 400 600 800 1000 1200 1400 1600 1800 2000 frequency (mhz) return loss (db) 0v 2v 4v 7v 10v RVA-2000V3+ phase shift vs. frequency over control voltages 0 75 150 225 300 375 450 525 0 200 400 600 800 1000 1200 1400 1600 1800 2000 frequency (mhz) phase shift (deg.) 0v 2v 4v 7v 10v notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com RVA-2000V3+ performance charts
|
